A. These hardware features are not supported on 2100 Series Controllers:
Service port (separate out-of-band management 10/100-Mb/s Ethernet interface)
These software features are not supported on 2100 Series Controllers:
VPN termination (such as IPsec and L2TP)
Termination of guest controller tunnels (origination of guest controller tunnels is supported)
External web authentication web server list
Layer 2 LWAPP
QoS per-user bandwidth contracts
Link aggregation (LAG)
Multicast unicast mode
Wired Guest Access
Tuesday, June 28, 2011
Monday, June 27, 2011
Thursday, June 23, 2011
!!By default, the following "voice service voip" !!
!!sub-command is enabled: !!
!! ip address trusted authenticate !!
!!The command enables the ip address authentication !!
!!on incoming H.323 or SIP trunk calls for toll fraud !!
!!prevention supports. !!
!!Please use "show ip address trusted list" command !!
!!to display a list of valid ip addresses for incoming !!
!!H.323 or SIP trunk calls. !!
!!Additional valid ip addresses can be added via the !!
!!following command line: !!
!! voice service voip !!
!! ip address trusted list !!
Monday, June 20, 2011
We are going to use a putty program to copy a file to our flash (could be an IOS or whatever you like really) without having to use FTP, simply over SSH, this is super useful for those times when:
1. You don't have an FTP server handy
2. Your behind NAT so you can't just start an FTP server
3. Your behind a restrictive firewall
How do? Easy,
First, go to putty and download this:
Go to "PSCP.exe" and download it.
My recommendation is to put it in c:\windows\system32\ or somewhere else in your path, by doing this you can use when your in the command line at any path (it is a command line app)
Ok, next we need to add this simple command to your router:
PeterCCIE18371(config)#ip scp server enable
THE above command is the KEY command guys
Also, you will need to have aaa new-model enabled (you don't already? why not?) and make sure your AAA authorization network is OK, so for example:
aaa authorization network
You will also need to have SSH enabled, so make sure you have something like this under your VTY Lines:
line vty 0 15
exec-timeout 800 0
transport input telnet ssh
and make sure you have a crypto key generated
crypto key generate RSA modulus 1024
now with all that done, let's actually try a copy
go to a dos prompt and check this out:
C:\Temp>pscp -scp FILE.CSV admin@HOSTNAMEORIPHERE:FILE.CSV1
Using keyboard-interactive authentication.
FILE.CSV | 0 kB | 0.7 kB/s | ETA: 00:00:00 | 100%
replace HOSTNAMEORIPHERE with your IP address and you will see how it all works.
So there you have it! easy way to copy without FTP! Great isn't it!
Sunday, June 19, 2011
Fantastic, thanks for that. Problem solved!
"timing hookflash-in 80" resulted in calls being disconnected when pressing R but I tried "timing hookflash-in 120 60" and now it works fine. I was trying increments of 100 at a time before.
bearer cap speech
Thursday, June 16, 2011
Wednesday, June 15, 2011
this blog post is mostly for me just to remind me:
When i was recently doing an install, it appeared that there was no Cisco Unity Connection CD with my CUWL pak even though I had ordered Unity Connection
just use your Unified Communications CD, and to make it come up as an option in Vmware make sure you use the OVA template.
Tuesday, June 7, 2011
make ASA behave like a router when scrolling through multiple pages:
pager line 24
write all context config at once when working with multiple contexts
wr mem all